2014 Aluminium Coil Specifications
Standards: ASTM B209 / ASME SB209/DIN 1725/JIS H4000
Size Thickness:0.1mm-30mm / Width:1mm-2200mm
Surface: mill, bright, polished, hairline, brush, sand blast, checkered, embossed, etching, etc
Temper: O, H12, H14, H16, H111, H22 ,H24, H26, H28,T4, T6,etc.
Coil ID: 75mm, 150mm, 200mm, 300mm, 400mm, 508mm, or negotiable
Coil OD: According to the customer’s requirements
Delivery Time: 7-20 days.
2014 Aluminum Coils Data Sheet
Equivalent Specifications of Aluminium 2014 Coil
Here’s a table displaying the equivalent specifications of Aluminum 2014 Coil across different standards and organizations:
| Standard | Equivalent Grades |
|---|---|
| ASTM B209 | Alloy 2014 |
| AMS 4028 | 2014-T6, 2014-T651 |
| AMS 4029 | 2014-O, 2014-T4 |
| EN AW-2014A | EN AW-2014A |
| DIN | AlCu4SiMg |
| AFNOR | A-U4G1 |
| BS | BS L97 |
This table shows the various standards and specifications equivalent to Aluminum 2014 coils. If you want to know more news, you can contact us directly!
Chemical Composition of 2014 Aluminum Coils
| Element | Al | Cu | Mg | Mn | Si | Fe | Zn | Ti | Others |
|---|---|---|---|---|---|---|---|---|---|
| Percentage (%) | 90.7 – 94.7 | 3.9 – 5.0 | 0.2 – 0.8 | 0.4 – 1.2 | 0.5 – 1.2 | 0.7 max | 0.25 max | 0.15 max | 0.15 max each, 0.05 max total |
The specific percentage range of various elements of 2014 aluminum coil, and the material composition provided by different 2014 aluminum coil manufacturers is a little different. If you want to know more about 2014 aluminum coil product details, you can contact us directly!
Mechanical Properties of 2014 Aluminium Coils
Here’s a comparison table of the mechanical properties of 2014 aluminum alloy coils with different tempers:
| Temper | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Hardness (HB) | Fatigue Strength (MPa) | Shear Strength (MPa) |
|---|---|---|---|---|---|---|
| T6 | 470 min | 380 min | 14 min | 130 min | 165 at 10^8 cycles | 310 min |
| T4 | 410 min | 320 min | 16 min | 120 min | 140 at 10^8 cycles | 260 min |
| O | 240 min | 110 min | 20 min | 70 max | 90 at 10^8 cycles | 170 min |
This table compares the effects of different tempering conditions on the mechanical properties of the 2014 aluminum coil and helps in selecting the appropriate tempering condition for specific application requirements.
Physical Properties of 2014 Aluminum Coils
| Property | Value |
|---|---|
| Density | Approximately 2.80 g/cm³ |
| Melting Point | 582-651°C (1080-1204°F) |
| Thermal Conductivity | 121 W/m·K |
| Electrical Conductivity | Approximately 33% IACS |
| Young’s Modulus (Modulus of Elasticity) | Around 72 GPa (10.4 x 10^6 psi) |
| Coefficient of Thermal Expansion (CTE) | 23.6 μm/m°C (at 20-100°C) |
| Specific Heat Capacity | Approximately 0.84 J/g·K |
| Hardness | Typically around 120 Brinell hardness |
This table provides a concise overview of the physical properties of 2014 aluminum coils, highlighting their density, thermal and electrical conductivity, mechanical stiffness, thermal expansion characteristics, specific heat capacity, and hardness. These properties collectively determine the suitability of 2014 aluminum for various industrial applications where these characteristics are crucial.
Tempers of 2014 Aluminum Coils
Here’s a table summarizing the tempers of 2014 aluminum coils along with their descriptions and properties:
| Temper | Description | Properties |
|---|---|---|
| T4 | Solution heat-treated and naturally aged | – Good combination of strength and ductility – Suitable for forming and machining operations |
| T6 | Solution heat treated and artificially aged | – Highest strength and hardness – Excellent toughness and fatigue resistance – Structural applications requiring high strength |
| T651 | Solution heat treated, stress relieved by stretching, and artificially aged | – Similar to T6 with improved stress relief characteristics – Excellent machinability and surface finish – Aerospace and high-performance applications |
| O | Annealed condition | – Fully annealed for maximum ductility and formability – Lowest strength and hardness – Ideal for deep drawing and forming applications |
For more information or pricing on 2014 aluminum coils, please get in touch with HXM and our team will respond to your message within 24 hours!
2014 Aluminum Coil Application
Aerospace Components:
- Used extensively in the aerospace industry for structural components, such as aircraft frames, wing skins, and fuselage parts, due to its high strength-to-weight ratio.
Military Applications:
- Suitable for military vehicles and equipment where high strength and durability are critical.
Automotive Parts:
- Used in high-performance automotive parts, including engine components and chassis, where strength and lightweight are essential.
Heavy Machinery:
- Employed in manufacturing heavy machinery and equipment that require strong and durable materials.
Marine Equipment:
- Utilized in marine applications with appropriate protective coatings to prevent corrosion in harsh environments.
Structural Applications:
- Ideal for structural applications requiring high strength and good machinability, such as bridges and towers.
2014 Aluminum Coil Packages
The following are the aluminum coil export packaging commonly used by our company. If you have special packaging requirements, we can meet them.
