5A05 Aluminum Bars

5A05 Aluminum Bars Specifications

Standards: ASTM B221, B211, B565, B316 3003, DIN AlMnCu

Aluminum bar form: Aluminum round, hexagonal, flat, semi-circular, oval, rectangular black, and glossy finish

Aluminum round bar diameter: 0.1-600mm, etc.

Aluminum hexagonal bar: 0.1-600mm, etc.

Aluminum angle bar size: 0.5mm*40mm*40mm-20mm*400mm*400mm

Aluminum flat steel thickness: 0.1-600mm, etc.

Aluminum flat bar size: 1-2500mm, etc.

Aluminum round bar length: 1-12m, random, fixed, and cut length or according to customer requirements

Product Introduction

Magnesium content is high, its strength is low, plasticity is high, corrosion resistance is good

5A05 is Al-Mg anti-rust type aluminum alloy, which cannot be strengthened by heat treatment. The alloy has a higher magnesium content and lower strength, which is similar to alloy 5A03. Cold deformation of the alloy can increase strength, but the plasticity is reduced. The plasticity of the annealing state is high, and the plasticity of the semi-cold work hardening state is acceptable. The corrosion resistance of the alloy is good and the weldability is acceptable, suitable for spot welding, atomic hydrogen welding, gas welding, argon arc welding. Its machinability, annealing state is very poor, semi-cold work hardening state is still good.

5A05 alloy is commonly used to manufacture welded pipes, welded fuel tanks and other liquid containers, and other parts that require high process plasticity, good corrosion resistance, and moderate loads; Wire is used as welding rods and rivets, which require an anodizing. In foreign countries, similar alloys (such as 5456) are used to make armor plates and high-strength structural parts. Storage tanks, pressure vessels, and marine parts.