5052 Aluminum Bars Specifications
Standards: ASTM B221, B211, B565, B316 3003, DIN AlMnCu
Aluminum bar form: Aluminum round, hexagonal, flat, semi-circular, oval, rectangular black, and glossy finish
Aluminum round bar diameter: 0.1-600mm, etc.
Aluminum hexagonal bar: 0.1-600mm, etc.
Aluminum angle bar size: 0.5mm*40mm*40mm-20mm*400mm*400mm
Aluminum flat steel thickness: 0.1-600mm, etc.
Aluminum flat bar size: 1-2500mm, etc.
Aluminum round bar length: 1-12m, random, fixed, and cut length or according to customer requirements
Product Introduction
Good corrosion resistance, good forming processing and weldability, and has medium strength
5052 belongs to the Al-Mg series of alloys, a wide range of use, especially in the construction industry can not do without this alloy, is the most promising alloy. Good corrosion resistance, excellent weldability, good cold working properties, and medium strength. The main alloying element of 5052 is magnesium, which has good forming and processing properties, corrosion resistance, weldability, medium strength, and is used in the manufacture of aircraft fuel tanks, tubing, and sheet metal parts for traffic vehicles and ships, instruments, street lamp brackets and rivets, hardware products, electric shells, etc. (2) AL-Mn alloy, is the most widely used anti-rust aluminum, the strength of this alloy is high, especially with fatigue strength: plasticity and corrosion resistance is high, can not be heat treatment strengthening, in the semi-cold work hardening plasticity is still good, cold work hardening when the plasticity is low, corrosion resistance is good, weldability is good, poor machinability, polishable. The main uses are high plasticity and good weldability, low-load parts working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made with deep drawing: wire is used to make rivets.
Typical uses
Alloy 5052 is widely used in components that require good formability and corrosion resistance, high fatigue limit, good weldability, and medium static load, such as aircraft fuel and oil pipes, fuel tanks, and various marine and land cloud equipment parts, cold stamping parts, sheet metal products, street lamp pillars; The material is used as a rivet or welding rod.
Chemical composition
Alloy grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | other | AL | |||
New grade | Old grade | 0.25 | 0.40 | 0.10 | 0.10 | 2.2-2.8 | 0.15-0.35 | 0.10 | —— | —— | each | total | ||
5052 | —— | 0.05 | 0.15 | Allowance |
Mechanical properties
Aluminum alloy grade and state | Tensile strength Rm/Mpa | Yield strength Rp0.2/Mpa | Elongation/% | Hardness/ HBWα |
5052-H112 | 170 | 70 | 13 | —— |
Physical properties
Aluminum alloy grade and state | Coefficient of thermal expansion (20-100℃) μm/m·k | Melting point range (℃) | Electrical conductivity 20℃(68℉) (%IACS) | Resistivity20℃(68℉) Ωmm2/m | Density (20℃)(g/cm3) |
5052-H112 | 23.8 | 607-649 | 35 | 0.0493 | 2.73 |
Quality characteristics
Density: 2.730g/cm³.
Poisson’s ratio: 0.33 at 20°C (68F).
Modulus of elasticity: Tensile: 69.3 GPa (10.1×106psi), shear 26GPa (3.75×106psi), compression 70.7GPa (10.3×106psi)
5052 Aluminum Bar Packages
The following is our company’s standard aluminum coil export packaging. If the customer has any packaging requirements, our company can meet them.